Home / Products / Equipment for machining bolsters

Equipment for machining bolsters

 Machine for processing friction (angled) surfaces of bolsters

К06.76-00.00.00.0-00

34

USAGE

It is used for machining angled surfaces of 18-100 bogie bolsters.

Machine for processing center plate of bolster Ø302mm and Ø317mm

К05.01-00.00.00.0-00

 35

USAGE

 

It is used for machining center plate of bolster Ø302mm and Ø317mm across diameter.

Machining of new center plates is possible as well as of those been in use by fusing center plate’s place.

36

 N -    rotor spinning

n -   milling cutter spinning

 

Scheme of machining bolster

 

37

 

Scheme of machining bolster Ø317Н14

 

38

A         25        30        36

 

Scheme of machining bolster Ø300 +1,8/+0,5

 

 

Machine for processing bogie side bearer base

К01.03-00.00.00.0-00

39

USAGE

It is used for machining bogie side bearer base after thermal shearing. Machining is performed both on inclined planes of bolsters and horizontal ones after welding bars.